Boat Seating for RIBS and open boats

Outhill boat seating combines marine quality GRP base storage units with attractive vinyl upholstery for comfort and style. We offer a wide range of sizes which can be used in isolation or combination to create the optimum seating solution.

BS3A

BS3A provides a simple seating/ storage solution with lift up arm rests combining a marine quality G.R.P. base storage unit with comfortable vinyl upholstered seating.
Dimensions: 49cm deep x 95cm wide x 77 cm high. Seat height 48cm

BS3, BS5 and BS8

BS3, BS5 and BS8 provides a simple seating/ storage solution combining a marine quality G.R.P. base storage unit with comfortable vinyl upholstery. Additional features Available with fold down or removable backrest
Dimensions: BS5 - 52cm deep x 74cm wide x 71 cm high. Seat height 42cm BS3 and BS8- 48cm deep x 95cm wide x 74 cm high. Seat height 42cm

BS6 and BS9

BS6 and BS9 back to back bench seat models offer a highly versatile seating solution which is particularly valuable when space is limited. The cushioned backrest is removable for ease of storage when not in use.
Dimensions: BS6 - 66cm deep x 67cm wide x 69 cm high. Seat height 39cm BS9- 79cm deep x 84cm wide x 74 cm high. Seat height 42cm

BS10

BS10 offers both style and practicality combining a striking bucket style bench seat with storage space beneath.
Dimensions: 37cm deep x 84cm wide 3 x seat heights available 40cm, 45cm, 50cm

BS18A

BS18A provides a simple and stylish seating solution with reversible backrest for maximum versatility. The backrest mechanism is manufactured from polished stainless steel for a striking finish
Dimensions: 54cm deep x 95.5cm wide x 80 cm high. Seat height 48cm

BS15

BS15 one of our most popular seats, BS15 provides an extremely versatile seating solution with its reversible backrest feature. The seat can be set in a forward position or reversed to watch activities raking place at the rear of the boat such as fishing or water skiing. All fixtures including backrest mechanism are manufactured in polished stainless steel.
Dimensions: 53cm deep x 99cm wide x 84 cm high. Seat height 52cm

BS20

BS20 combines padded luxurious upholstery with a reversible backrest for maximum versatility. The backrest mechanism and other fittings are manufactured from polished stainless steel.
Dimensions: 61cm deep x 113cm wide x 92 cm high. Seat height 56cm

BS23

BS23 a 3 seater version of our popular BS20 with luxurious upholstery with a reversible backrest for maximum versatility. The backrest mechanism and other fittings are manufactured from polished stainless steel.
Dimensions: 61cm deep x 134cm wide x 92 cm high. Seat height 56cm

BS21

BS21 Offers style and comfort combined with practicality. The seat incorporates lift up arm rests for ease of access.
Dimensions: 48cm deep x 112cm wide x 76 cm high. Seat height 46cm

BS24

BS24 a wide bench seat with a split fold down backrest particularly suitable for fly bridges. The seat incorporates storage space beneath which provides ideal storage for ropes and other fly bridge equipment.
Dimensions: 45cm deep x 135cm wide x 74 cm high. Seat height 45cm

BS26

BS26 a generous 3 person bench seat fitted with gas stays for ease of access to the storage box beneath.
Dimensions: 62cm deep x 149cm wide x 89 cm high. Seat height 48cm

Outhill Jockey Consoles and Seating provide the best solution for the more demanding driver who enjoys the high speed ride. The tough G.R.P. base units have been shaped to maximise driver/ passenger comfort incorporating high quality upholstered seating into every model.

JC6SA and JC6TA

JC6SA and JC6TA Provide a compact 1 or 2 person console/ seating solution which is ideal for application in smaller RIBs. The models incorporate a hinged seat for ease of fitting/ maintenance of instruments and access to storage space beneath which can be used for fuel tank installation.
Dimensions: JC6SA - 91cm deep x 37cm wide x 60 cm high. Seat height 49cm JC6TA- 110cm deep x 37cm wide x 60 cm high. Seat height 49cm

JC4S

JC4S single seat jockey console with external flange
Dimensions: JC4S - 108cm deep x 49cm wide x 74 cm high. Seat height 52cm, Height to top of backrest 105cm

JC4TA

JC4TA provides a highly functional 2 person steering and seating console solution, ideal for application in medium sized RIBs. This model incorporates an upholstered left up seat with storage space beneath which can be used for fuel tank installation. .........
Dimensions: JC4TA - 123cm deep x 46cm wide x 74 cm high. Seat height 52cm , Height to top of backrest 105cm

JC14T

JC14T The efficient console base design which provides under seat storage will accept up to a 22 litre plastic fuel tank through rear, is ideal for use in smaller RIBs. A deluxe steeped height seat cushion in quality vinyl upholstery adds maximum comfort.
Dimensions: 127cm deep x 39cm wide x 94 cm high. Seat height 52cm

JC12T

JC12T combines an eye catching colour co-ordinated cowl design with maximum functionality and is ideal for application in medium sized RIBs. This deluxe 2 person jockey console incorporate a tapered base for maximum comfort with a stylish stepped height seat cushion. The model provides ample under seat storage and will accept up to a 22 litre plastic fuel tank through rear.
Dimensions: 144cm deep x 51cm wide x 101 cm high. Seat height 60cm

JC17T

JC17T is a stylish new addition to our range and is ideal for application in medium sized RIBs. The model can be purchased with or without the optional windscreen and rail.
Dimensions: 148cm deep x 50cm wide x 98 cm high (excluding screen and rail)

JC3T

JC3T our oldest and still most popular model is ideal for application in larger RIBs. This simple, straightforward design provides a large area for instrumentation along with convenient under seat storage.
Dimensions: 159cm deep x 61cm wide x 101 cm high. Seat height 65cm

JC16T

JC16T large two person console with double backrest feature and large area for instrumentation. This model incorporates an external flange to allow easier fitting of a fuel tank beneath the console.
Dimensions: 186cm deep x 64cm wide x 144 cm high. Seat height 68.5cm

JS6S and JS6T

JS6S and JS6T smart and stylish jockey seats available on both singe and 2 person sizes. Seat base units have a tapered design for maximum comfort and incorporate quality vinyl upholstery. Backrest is manufactured from G.R.P. and polished stainless steel for durability
Dimensions: JS6S - 59cm deep x 32cm wide x 110 cm high. Seat height 64cm JS6T- 88cm deep x 32cm wide x 110 cm high. Seat height 64cm

JS6/TT

JS6/TT a new edition to our jockey seat range with stylish dual backrest design to ensure maximum comfort for both passengers. Seat base units have a tapered design for maximum comfort and incorporate quality vinyl upholstery. Backrest is manufactured from G.R.P. and polished stainless steel for durability.
Dimensions: 115cm deep x 32cm wide x 110 cm high. Seat height 64cm

Outhill provide a comprehensive range of stylish and practical Centre Steering Consoles manufactured from marine quality G.R.P. All consoles are designed to maximise the potential area for mounting steering and navigational equipment and incorporate storage and extra seating on some models.

CC16

CC16 simple and stylish centre consoles with colour co-ordinated GRP cowl feature which are popular with the Avon Rover range
Dimensions: 41cm deep x 36cm wide x 75 cm high

CC20/FS

CC20/FS A forward seat version of CC21/SS is also available using the same head and base unit configured in a different manner. CC20/FS shown with optional backrest which can be purchased seperately.
Dimensions: 95cm deep x 50cm wide x 117 cm high . Seat height 40cm

CC15

CC15 simple and stylish centre consoles with colour co-ordinated GRP cowl feature which are popular with the Avon Adventure range. CC15 suits boats of 4m and larger.
Dimensions: 50cm deep x 50cm wide x 83 cm high

CC21/SS/MK2

CC21/SS/MK2 A very popular arrangement which provides a practical combination of a centre console with an upholstered side seat/ storage unit. The console face provides ample room for mounting instrumentation and features a compass mounting incorporated within the moulding. Both console head and seat cushion are hinged for easy installation/ maintenance of instruments and access to storage space beneath.
Dimensions: 52cm deep x 90cm wide x 117 cm high Seat height 40cm

CC12/FS

CC12/FS one of our most popular models the CC12/FS is guaranteed to stand out from the crowd. This console incorporates a stylish colour co-ordinated twin cowl feature. The dual control panel allows for maximum installation of steering/ navigational equipment and provides a central position for ideal for compass mounting.
Dimensions: 94cm deep x 92cm wide x 102 cm high . Seat Height 50cm

CC14/FS

CC14/FS For those who like a windscreen for that high sped ride. The model incorporates a heavy duty Perspex windscreen available in 2 height, with a polished stainless steel rail. The top of the unit is hinged for ease of fitting/ maintaining instruments. Windscreen available in 2 heights, high (pictured) and low
Dimensions: 94cm deep x 92cm wide x 135 cm high (low screen) or 155cm hight (high Screen) . Seat Height 50cm

CC19/FS

CC19/FS is a most stylish new edition to our split console range. This model provides maximum space for instrumentation and controls, and the over hang design provides plenty of leg room. The model also features new style from seat upholstery.
Dimensions: 122cm deep x 92cm wide x 142 cm high . Seat Height 52cm

CC22/FS

CC22/FS is a variation on our popular CC19/FS. The CC22/FS has been designed with a recessed front mounting area which allows for the easy installation of hydraulic steering systems which are so popular on RIBS today.
Dimensions: 122cm deep x 92cm wide x 142 cm high . Seat Height 52cm

CC23

CC23 is the most recent addition to our large steering console range. This stylish one piece moulding can be fitted with either a high or low screen and stainless steel rail (low pictured) for superior wind/ weather protection. This model has a large access hatch to the rear to allow for easy mounting of steering/ instrumentation and our 100 fuel tank FT1 can easily be fitted into the console base.
Dimensions: 53cm deep x 96cm wide . Height- Low screen 157cm, Height high screen 177cm

LP2/MK2

	Position 1

	Position 2
LP2/MK2 a restyled version of our popular model LP2 which was introduced last year. LP2/ MK2 is made from a single GRP moulding which provides a large, enclosed storage space beneath the seat and additional storage in the top section. LP2/ MK2 can be used in position 1 as a lean post or position 2 as a seat. When space is a factor, LP2/ MK2 provides a lean post and seat in one stylish moulding. This model can also be supplied without lift up seats (LP3)
Dimensions: Seat dowm: 45cm deep x 102cm wide x 93 cm high . Seat up: 73cm deep x 102cm wide x 93 cm high, Seat height 59cm .

LP2/MK3

LP2/MK3 is a variation on our popular LP2/MK2. With this model, the lift up seat cushions are mounted on the back of the lean post providing additional seating for passengers. An upholstered backrest/ hatch cover is also provided for added comfort.
Dimensions: Seat dowm: 45cm deep x 102cm wide x 93 cm high . Seat up: 73cm deep x 102cm wide x 93 cm high, Seat height 59cm .

LP4

LP4 helm station leaning post is ideal for use in a RIB or cruiser. This stylish model incorporates a GRP moulded sink and stove mounting area concealed beneath the hinged top moulding. LP4 can be fitted with an Origo 2000 single burner spirit stove or similar appliance. A deck wash could also easily be fitted. The top moulding includes sculptured padded upholstery to ensure maximum comfort whilst the base moulding provides a generous storage compartment below.
Dimensions: 53cm deep x 105cm wide x 122 cm high .

LP5

LP5 the most recent addition to our range of lean posts. This model encorporates a flip-up bolster seat design along with a fold down table moulding to the rear .
Dimensions: 84cm deep (table and seat extended) x 100cm wide x 105 cm high . Seat height 50cm.

Outhills range of stylish Deck Lockers/ Seat boxes have been developed over a number of years and are of robust construction, manufactured from marine quality G.R.P. All models are fitted with bases and provide an ideal solution for extra storage/ seating. Seat cushions and locking catches can be supplied.

DL20 and DL23

Dimensions: DL20 - 54cm deep x 110cm wide x 46 cm high. DL23 - 53cm deep x 134cm wide x 48cm high

Our range of stylish and practical Galley Units create the ideal solution for integrating cooking, sink and cooler facilities onboard and are ideal for use in motor crusiers and other day boats.

UB1


UB1 a stylish galley unit which incorporates a GRP moulded sink and cool box. UB1 can also be fitted with a Cookmate single burner spirit stove or similar appliance. A deck wash could also easily be fitted. This pratical unit also provides a generous storage space which is easiliy accessed via a large front hatch.
Dimensions: 53cm deep x 105cm wide x 71 cm high.

UB3

UB3 a practical seat box complete with single burner spirit stove. This model can be fitted with our fold down seat (model S10) - sold seperately, or a simple upholstery seat pad if required.
Dimensions: 68cm deep x 46cm wide x 103 cm high. Dimensions exclude any fitted seats.

UB2

UB2 a practical seat box complete with sink and deck wash facility. This model can be fitted with our fold down seat (model S10) - sold seperately, or a simple upholstery seat pad if required.
Dimensions: 68cm deep x 46cm wide x 103 cm high. Dimensions exclude any fitted seats.

Outhill Helm and Pilot Seats are supplied in a range of attractive vinyl colours. A range of seat pedestals are also available.

Seat shells are manufactured in GRP with laminated plywood bases for strength.

S01

S01 High back helm seat ideal for floor mounting for application in sports boats.
Dimensions: 67cm deep x 53cm wide x 74 cm high.

S03

S03 upholstered helm seat ideal for pedestal mounting
Dimensions: 61cm deep x 60cm wide x 55 cm high.

S04

S04 helm seat ideal for floor mounting for application in sports boats.
Dimensions: 60cm deep x 54cm wide x 52 cm high.

S06

S06 narrow helm seat ideal for use insports boats.
Dimensions: 60cm deep x 52cm wide x 53 cm high.

S07

S07 upholstered helm seat ideal for pedestal mounting.
Dimensions: 50cm deep x 54cm wide x 40 cm high.

S08

S08 large helm seat ideal for pedestal mounting
Dimensions: 65cm deep x 69cm wide x 66 cm high.

S09

S09 helm seat with flip up seat cushion
Dimensions: 50cm deep x 56cm wide x 53 cm high.

S/BS10

S/BS10 2 seater bucket style bench seat.
Dimensions: 55cm deep x 100cm wide x 38 cm high.

S/BS7

S/BS7 3 seater bucket style bench seat.
Dimensions: 53cm deep x 130cm wide x 38 cm high.

S10

S10 Fold down helm seat.
Dimensions: 43cm deep x 40cm wide x 43 cm high.

S11

S11 Helm seat with padded lift up arm rests.
Dimensions: 54cm deep x 60cm wide x 55 cm high.

S12

S12 large helm seat with stainless steel arm rests. Pedestal sold seperately.
Dimensions: 72cm deep x 72cm wide x 83cm high.

S/BS26

BS26 a generous 3 person bench seat which can be supplied as upholstery only or mounted upon a GRP storage locker.
Dimensions: 62cm deep x 149cm wide x 55 cm high.

S/BS27

BS27 a stylish 2 seater complete with individual flip-up bolsters which can be supplied as upholstery only or mounted upon a GRP storage locker.
Dimensions: 70cm deep x 115cm wide x 57 cm high.

Model	Base diameter	Min height	Max height	External tube dia.	Internal tube dia.
10605/A	30cm	40cm	60cm	8cm	6cm
10605/C	30cm	43cm	63cm	8cm	6cm
10902/A	30cm	40cm	59cm	8cm	6cm
10902/C	30cm	43cm	62cm	8cm	6cm

For serious weather protection!

The wheelhouse represents the ideal solution for the person using an open boat in all weathers.

Features

Fits to any flat deck.

Small footprint can be fitted into relatively small craft.

Can be fully enclosed with bulkhead and door or open backed.

With careful thought a small toilet and washbasin could be fitted to make it a comfortable all day work station.

Can be supplied in kit form or fully complete to your specification.

Dimensions
Base length:	125cm
Base width:	120cm
Width at window level:	130cm
Roof dimensions:	150cm L. x 144cm W
Overall height:	205cm
Height to gallery:	118cm
Door opening:	45cm x 162cm
Weight with windows and bulkhead:	150kg Approx*

Construction: Glass Reinforced Plastic, Choice of windows available.

For more information and pricing contact us on: 01527 853798 or via email.

New items and upholstery re-trim

Outhill Boatbuilders have over 25 years experience manufacturing boat seating and cushions for the marine trade and we are known for the high quality of our upholstery. We only use high quality materials and the skill of our upholsterers ensures a professional result every time.

Let us bring our expertise to your own upholstery. We are able to:

Modify existing cushions, to provide more shape or padding
Replace tired vinyl and foams
Produce a new cushion to your specifications

We do have a large range of moulds at our yard so if you are looking for something which is not shown on this part of the website, please contact us since we may have something suitable.

CC1 Centre Steering Console

£231.00 + VAT
Dimensions: Depth: 44cm, Width: 84cm, Height: 100cm

CC2 Centre Steering Console

£215.25 + VAT
Dimensions: Depth: 39cm, Width: 66cm, Height: 100cm

CC6 Centre Steering Console

£189.00 + VAT
Dimensions: Depth: 39cm, Width: 48cm, Height: 100cm

JS3S Jockey Seat

£120.75 + VAT
Moulding only - Does not include stainless steel or upholstery or fixings. Upholstery can be supplied at an additional cost.
Dimensions:Length: 67cm, Width: 33cm, Seat height (if fitted with cushion): 65cm, External flange width: 4cm

JS3T Jockey Seat

141.75 + VAT
Moulding only - Does not include stainless steel or upholstery or fixings. Upholstery can be supplied at an additional cost.
Dimensions:Length: 85cm, Width: 33cm, Seat height (if fitted with cushion): 65cm, External flange width: 4cm

DL1 Deck Locker

£267.75 + VAT
Moulding only - Does not include hinges or catches.
Dimensions:Depth: 50cm, Width: 60cm, height: 51cm

DL2 Deck Locker

£288.75 + VAT
Moulding only - Does not include hinges or catches.
Dimensions:Depth: 50cm, Width: 83cm, height: 51cm

DL3 Deck Locker

£315.00 + VAT
Moulding only - Does not include hinges or catches.
Dimensions:Depth: 43cm, Width: 110cm, height: 49cm

DL4 Deck Locker

£294.00 + VAT
Moulding only - Does not include hinges or catches.
Dimensions:Depth: 43cm, Width: 84cm, height: 40cm (low version) Depth: 46cm, Width: 87cm, height: 54cm (high version)

DL5 Deck Locker

£315.00 + VAT
Moulding only - Does not include hinges or catches.
Dimensions:Depth: 43cm, Width: 101cm, height: 40cm (low version) Depth: 46cm, Width: 104cm, height: 54cm (high version)

DL7 Deck Locker

£336.00 + VAT
Moulding only - Does not include hinges or catches.
Dimensions:Depth: 45cm, Width: 142cm, height: 40cm (low version) Depth: 47cm, Width: 145cm, height: 54cm (high version)

EC1 Equipment Container

£115.50 + VAT
Dimensions: Depth: 30cm, Width: 30cm, Height: 42cm, Back board 36cm 48cm

FE1 & FE2 Fire Extinguisher insert mouldings

FE1 - £36.75 + VAT, FE2 - £49.35 + VAT
Dimensions:FE1 -Height: 36cm, Width: 11.5cm, depth: 9.5cm, FE2 -Height: 52cm, Width: 15cm, depth: 9.5cm

FF1 & FF2 Fuel filler insert mouldings

FF1 - £36.75 + VAT, FF2 - £36.75 + VAT
Dimensions:FF1(External) -Height: 30cm, Width: 13cm, depth: 11cm, FF2(Internal) -Height: 20cm, Width: 13cm, depth: 11cm,

BP1 Deck bilge pump recess moulding

£49.35 + VAT
Dimensions: Depth: 21.5cm, Width: 29cm, Recess depth: 15cm

S1 Steps

£252.00 + VAT
Dimensions: Depth: 92cm, Width: 50cm, Height: 76cm, Flange width 4cm, step height 25cm

Table Tops

TT1 Circular table top. 58cm diameter - £69.30 + VAT TT2 Fold up table top. 76 x 74 cm - £199.50 + VAT TT3 Square table top. 78 x 78 cm - £92.40 + VAT TT4 Rectangular table top with insert for drinking glasses etc. 123 x 74 cm - £168.00 + VAT P1 Pedestal, fits TT1, TT2, TT3 - £61.95 + VAT

Ranger 10

Please contact us for prices and details
Moulding only - Does not include wood, fixtures or fittings
Dimensions:Length: 9' 8", Beam: 4' 6"

Ranger 12

Please contact us for prices and details
Moulding only - Does not include fixtures or fittings
Dimensions:Length: 12' 6 ", Beam: 5' 6"

Ranger 17

Please contact us for prices and details
Moulding only - Does not include fixtures or fittings
Dimensions:Length: 17' 0 ", Beam: 6' 6"

Ranger 20

Please contact us for prices and details
Moulding only - Does not include fixtures or fittings
Dimensions:Length: 20' 8 ", Beam: 7' 6"

	CC24/FS

CC24/FS centre console with forward facing seat, seat and backrest cushions, windscreen, stainless steel rail and storage locker under front seat (steering wheel not included)
Dimensions: 95cm deep x 80cm wide x 140 cm high . Seat Height 50cm